taiwantunnel

ZST-MS9838 Why Your Drone Needs a Smarter Magnetic Sensor

Sun, 19 Apr 2026 23:51:12 GMT

Drones are increasingly operating in environments that require highly accurate heading data. They're operating under bridges, inside warehouses, and through dense urban corridors where satellite signals bounce off every surface. Defense and public safety teams are preparing for GPS-jammed environments. Drones operating in swarms also require orientation data to avoid catastrophic collisions.

In these environments, your magnetic sensor is the primary heading reference. With additional conditions such as noise, temperature variables: your GPS inevitably demands a magnetic sensor that could address these issues.

Where Most Sensors Fall Short

Noise: A sensor with poor noise rejection picks up that interference and feeds unreliable heading data resulting in heading jumps, toilet-bowl orbits, etc.

Temperature drift: Sensors with high temperature coefficients quietly corrupt heading data as conditions change, one wouldn't be able to gauge this drift at first glance.

Calibration difficulties: Hard-iron and soft-iron offsets change with every new payload configuration, and recalibrating for each one creates further inefficiencies.

What the ZST-MS9838 Does Differently

ZST-TMS9838 is a triaxial magnetic sensor with high-temperature stability and low output noise, operating at 3.3V. It is packaged in a QFN and achieves MSL1 level performance, meeting stringent assembly and environmental requirements. Specifically designed for high-precision magnetic field detection, this product boasts excellent noise suppression and wide-temperature stable output characteristics, making it particularly suitable for applications such as drones, industrial robots, and AIoT.

It supports magnetic field measurements in dynamic, static, and transitional states, making it ideal for precise attitude and motion sensing, and its built-in fast calibration algorithm simplifies system development, improving overall reliability and user experience.

On the integration side: 3×3×0.8 mm QFN-16 package, I2C and I3C interfaces, 2.6–3.6V supply range. It's small enough to mount away from noise sources on even compact frames, and the I3C support means it plays well with newer flight controller architectures.

Key Features

High-sensitivity triaxial magnetometer
Ultra-low noise output
High data output rate
Excellent temperature stability (low temperature drift)
Fast calibration (built-in hardware algorithm)
QFN package (LGA compatible), with industrial-grade humidity tolerance (MSL1)

Specifications

Dimensions (mm³): 3*3*0.8
Supply voltage (V): 2.6-3.6
Communication interface: I2C/I3C
I/O voltage (V): 3.3
Packaging type: QFN-16
Field Range > 30Oe
VDD 3.3V
ODR > 300 Hz
QFN 3.00x3.00 mm2

Magnetic Sensor Made in Taiwan

The ZST-MS9838 is manufactured in Taiwan. If you're building for government contracts, public safety agencies, or any program that requires non-PRC origin components.

Contact us for spec sheets and learn more about ZST-MS9838

ZST-ESC65A-4in1-S2 : Designed, Manufactured, Sealed entirely in Taiwan

Sun, 12 Apr 2026 15:49:29 GMT

Component origin hindering your procurement effort?

This importance of origin traceability and compliance will continue in 2026 as a key issue as both sides of the Atlantic have either begun or rolled out new regulations to strengthen their critical component supply chain.

The American Security Drone Act (ASDA) went into full effect on December 22, 2025, since then ritical drone components have been added to the covered List ; while several EU member states have already restricted Chinese-manufactured drones in defense and public security sectors.

The ZST-ESC65A-4in1-S2 including passive components is designed and manufactured, sealed entirely in Taiwan, built with AM32 firmware, thermal and over-current protection and NDAA compliant

65A Continuous With 8S Support: The Performance Specs

ZST-ESC65A-4in1-S2 is built to perform in demanding circumstances. Cortex-M4's DSP hardware paired with AM32 handles motor control calculations faster and in fewer processing cycles than older architectures, ensuring a smoother throttle response. AM32 firmware supports experimental FOC modes for quieter low-speed operation: a superior alternative to BLHeli_32 for those looking for a more open-sourced option.

Continuous current: 65A per channel
Burst current: 80A peak (10 seconds) per channel
Voltage range: 3S–8S Li-Po (11.1V–25.2V)
Controller: ARM 32-bit Cortex-M4 with built-in DSP
Firmware: AM32 — open-source, field-upgradeable, no licensing fees
Protocols: PWM, DShot300, DShot600
Telemetry: Ammeter + telemetry support
Protection: Thermal + over-current
Mounting: 30.5 × 30.5mm, M3 screws
Weight: 22g

Compliance and origin shouldn’t be the bottleneck

Sunrise Taiwan is your trusted bridge between global demand and Taiwanese manufacturing excellence. We deliver one-stop, 100% non-PRC origin drone component solutions that combine in-house R&D, manufacturing capabilities, and cybersecurity expertise — helping global defense and enterprise clients accelerate certification and reduce procurement risks.

Mercury H743 Flight Controller — Technical Deep Dive & Compliance Overview

Mon, 02 Mar 2026 03:02:37 GMT

Mercury H743 Flight Controller —

Technical Deep Dive & Compliance Overview

Product Overview

The Mercury H743 Flight Controller (ZST-FCH743-SC01) is an industrial-grade standalone flight controller designed for high-stakes UAV missions. It eliminates the need for complex carrier boards while providing high-speed processing and sensor redundancy.

High-Performance Flight Control Meets NDAA Compliance – Empowering the Next Generation of Autonomous Systems.

In an era where supply chain integrity is paramount, we introduce the ZST-FCH743-SC01, a robust flight controller engineered for mission-critical UAV applications.

Geopolitical Resilience:
100% Designed and Manufactured in Taiwan. Fully compliant with NDAA standards, providing a secure, non-adversarial supply chain for global defense and commercial sectors.

Mission-Critical Reliability:
Built on the STM32H743VIH6 (480MHz) MCU, featuring dual IMU redundancy and a separated power design to ensure flight stability in complex electromagnetic environments.

Rapid Integration:
Featuring 8x SH1.0 solderless connectors. We reduce assembly time and human error, allowing OEMs to scale production from enterprise inspection drones to tactical UAVs with ease.

Open-Source Versatility:
Seamlessly supports ArduPilot, PX4, and Betaflight, offering the flexibility needed for diverse industrial ecosystems.

[Compaison]

I. Technical Specifications Comparison

II. Global Compliance & Transparency Commitment

In response to the growing demand for secure drone technology, Sunrise Taiwan ensures full transparency across our hardware and software stack:

Made in Taiwan (MIT) : All R&D and manufacturing processes are based in Taiwan.
NDAA Compliant : Guaranteed zero-risk components from prohibited entities.
BOM Sourcing & Origin Declaration : We provide verified documentation for hardware provenance and component sourcing.

III. Expansion & Interfaces

Connectivity : 7x UART, 1x CAN, 1x SPI (Dual CS), 1x I2C.
PWM/DSHOT : 10x Channels (8x connectors, 2x solder pads).
Onboard Sensors : High-precision Barometer (DPS310) and Magnetometer (IST8310).
Storage : MicroSD card slot for high-fidelity flight logging.

Key Features :

* STM32H743VIH6 MCU @ 480 MHz

* 8 × SH1.0 connectors + USB port (plug-and-play, no soldering required)

* Dual power supply design (MCU and sensors separated)

* Dual IMU (ICM42688P ×2) for redundancy

* Integrated barometer (DPS310) and magnetometer (IST8310)

Dual BECs: 5 V-2 A, 10.4 V-1.5A

Interfaces & Expansion :

• UART ×7 (UART1/2/3/4/6/7/8)

• PWM/DSHOT ×10 (Ch1–8 connectors, Ch9–10 solder pads)

• CAN ×1, SPI ×1 (with dual CS), I2C ×1

• SD card slot ×1

• GPIO ×4, ADC ×5, SWD debug ×1

• On-board LED ×1, Buzzer ×1

Venus 640 Thermal Camera Module is designed for UAVs and mission-critical platforms.

Mon, 15 Dec 2025 02:47:07 GMT

The Venus 640 Thermal Camera Module (ST-TC640-JP) is designed for UAVs and mobile platforms requiring reliable long-wave infrared imaging. With 640×512 resolution, 12 µm pixel pitch, and NETD ≤40 mK, it delivers consistent thermal performance in low-visibility and night operations.

Low power consumption and USB / UART interfaces allow fast integration across unmanned and industrial systems.

Built on a China-free, NDAA-ready supply chain, it is suitable for defense, public safety, and inspection applications.

 Due to material constraints and limited manpower, only standard product orders are currently accepted. Custom projects are temporarily unavailable.

Venus Dual EO/IR Camera (ZST-CFP DUAL-CAM02)

Mon, 08 Dec 2025 05:09:53 GMT

A lightweight, long-range dual-sensor imaging module engineered for ISR-grade performance.

The Venus Dual EO/IR integrates a 20MP EO sensor, LWIR thermal camera, and long-range optical zoom into a compact 26g payload—ideal for small UAVs, unmanned ground vehicles, and robotic platforms.

Key Features

�� Dual-Spectrum Imaging (EO + IR)
Delivers reliable visibility across day, night, low-light, and smoke-obscured environments.
�� High-Resolution EO Sensor
20MP (5120×3840) with 1080p/30fps real-time output.
�� LWIR Thermal Imaging
640×512 @ 30fps for enhanced target detection and tracking.
�� 17.8× Optical Zoom with >3.1 km Operational Range
Suitable for ISR, perimeter security, search & rescue, and industrial inspections.
�� Ultra-Lightweight: Only 26g
Designed for SWaP-constrained UAV platforms.
�� NDAA-Compliance & China-Free
Built entirely in Taiwan with a non-red supply chain for defense procurement compatibility.

Applications

�� UAV ISR payloads

�� UGV/USV systems

�� Critical infrastructure inspection

�� Search & rescue operations

�� Border and perimeter monitoring

�� AI vision and robotic mapping systems

Polaris F405-55A Stack：A Secure, NDAA-Compliant Flight Control & Power System for Professional UAV Platforms

Mon, 01 Dec 2025 07:37:36 GMT

Overview

The Polaris F405-55A Stack is a high-integration flight-control solution engineered for defense-grade UAV platforms, multirotor development, and commercial drone applications. Combining an STM32F405 MCU with a 55A BLHeli_S 4-in-1 ESC , it delivers fast processing, low-latency control, robust power architecture, and exceptional noise immunity—providing a reliable flight core for demanding environments.

Built entirely through a China-free, NDAA-compliant supply chain , every critical component is sourced from Taiwan, the U.S., or allied-nation suppliers. This makes Polaris an ideal choice for commercial UAV manufacturers, government integrators, defense contractors, and developers building secure, compliant aerial systems.

____________________________________________________________________________________________________________________________________________

Key Features

High-Performance Flight Controller – STM32F405
● 168 MHz processor
● ICM42688P IMU for ultra-low noise and high responsiveness
● Onboard Blackbox flight-data recording
● USB Type-C interface
● Compatible with Betaflight / INAV / PX4 (depending on firmware version)
Industrial-Grade 55A 4-in-1 ESC
● 55A continuous / 65A peak
● BLHeli_S firmware
● DShot300 / 600 support
● High-efficiency MOSFET
● TVS surge protection + 1000 µF low-ESR capacitor
● Suitable for 5″–7″ FPV, X8 configurations, and medium-class UAV platforms
Robust Power Architecture
● Supports 3–6S LiPo
● 5V 3A / 9V 2.5A regulated outputs
● Ultra-low noise filtering
● Ideal for high-power VTX, cameras, navigation modules, and communication systems
Structural Reliability & Integration
● Standard 30.5 × 30.5 mm mounting pattern
● Reinforced power-layer design
● Vibration-dampening silicone standoffs
● Compatible with commercial UAV frames
● Optional digital-FPV connector (DJI / Walksnail / HDZero)

____________________________________________________________________________________________________________________________________________

Applications

Ideal for:

● Industrial inspection drones

● Medium-class multirotor platforms

● ISR / reconnaissance systems
● Delivery UAVs

● Commercial FPV and long-range builds

● Academic & defense R&D platforms

____________________________________________________________________________________________________________________________________________

Commitment to Secure Supply Chains

The Polaris series reflects Sunrise Taiwan’s mission to provide secure, NDAA-compliant, China-free UAV electronics for global partners.
Every unit is engineered and assembled in Taiwan under strict quality control and complete traceability.

For datasheets, integration support, or OEM collaboration, please contact Sunrise Taiwan.

VORTEX I : The Integrated Propulsion System for Next-Gen Industrial UAVs

Mon, 10 Nov 2025 11:37:39 GMT

The VORTEX I is a revolutionary Integrated Propulsion System designed to redefine performance for heavy-lift industrial and agricultural drones . This ready-to-use solution combines a high-output motor , an integrated electronic speed controller (ESC) , and perfectly matched propellers , delivering a seamless blend of raw power , intelligent control , and unparalleled reliability for your most demanding applications. Engineered for optimal compatibility and peak efficiency , the VORTEX I ensures robust and consistent flight performance across diverse heavy-duty operations .

Key Features

• Integrated Propulsion System: Combines motor, ESC, propeller, and motor mount into one unified unit for plug-and-play installation and exceptional ease of use.

• Optimized Propeller Selection: Comes standard with 36-inch folding propellers, with options to select different propeller sizes to perfectly match various single-axis load requirements.

• High Power Density: Each unit provides an impressive maximum single-axis thrust exceeding 24kg, designed for 9-10kg single-axis loads, enabling superior heavy-lift capabilities.

• Directional Versatility: Supplied as a set with both clockwise and counter-clockwise rotating motor units for balanced and stable flight dynamics.

• Robust & Reliable Design: Motor and ESC are integrated into a single, compact form factor, enhancing durability and simplifying maintenance.

• NDAA Compliance: Designed to meet the stringent requirements of the US National Defense Authorization Act (NDAA).

Technical Specifications

• Motor KV: 100

• Configuration: 36N 40P

• Stator Diameter: 100mm

• Motor Diameter: 109mm

• Max Input: 4600 watt

• Standard Propeller: 36-inch folding propeller

• Single-Axis Load: 9-10kg recommended

�� Why Choose the VORTEX I ?

With its innovative integrated design , ultra-high power output , and the flexibility to optimize propeller sizes , the VORTEX I is the definitive choice for drone manufacturers and operators requiring maximum performance for heavy-lift tasks . Whether you're powering a 16L four-axis agricultural sprayer, a 25L six-axis agricultural drone, or multi-rotors with take-off weights ranging from 36kg to 80kg, this system guarantees consistent power and operational efficiency. Designed to meet the stringent requirements of the US National Defense Authorization Act (NDAA) , it ensures full compliance and reliability for both commercial and defense-grade applications.

✨ Unlock the full potential of your industrial UAVs today.

Stone 107010 Motor 900KV: Unmatched Power and Precision for large-sized agriculture and cargo drones

Fri, 31 Oct 2025 03:00:49 GMT

The Stone 107010 Motor 900KV is a high-performance brushless motor meticulously engineered fo r large-sized agriculture and cargo drones. Delivering an optimal balance of raw power , efficient operation , and exceptional reliability , th is motor ensures your drones achieve superior flight performance and operational stability. It integrates our advanced motor technology, refined through years of developing electric mobility powertrains, into a compact and robust package.

Key Features

U ltra-High Thrust Capacity : Designed for large-sized agriculture and cargo drones, offering up to 37.4kg of max thrust per motor.
High-Performance Lineage : Benefits from advanced motor technology developed for electric mobility.
Non-PRC Supply Chain : Built with a China-free supply chain for enhanced security and component integrity.
Optimal Power Density : Delivers 7800W max power from a lightweight 1100g design.
NDAA Compliance : Designed to meet the requirements of the US National Defense Authorization Act (NDAA).

Technical Specifications

KV Value: 90
Weight: 1100g
Motor Size: Ø107*50L mm

�� Why Choose the Stone 107010 Motor?

With its compact 1100g lightweight design , formidable 37.4kg max thrust , and Taiwanese manufacturing reliability , the Stone 107010 Motor is the trusted choice for professional drone operators and manufacturers. Our commitment to a China-free supply chain and NDAA compliance ensures this motor is suitable for the most sensitive and high-stakes operations. For security-conscious fleets, the combination of high-end performance engineering and verifiable supply chain integrity is unmatched.

✨ Experience the next level of drone performance today.

Stone 3115 Motor: Unmatched Power and Precision for FPV drones

Mon, 20 Oct 2025 09:36:03 GMT

The Stone 3115 Motor is a high-performance brushless motor meticulously engineered for FPV drones. Delivering an optimal balance of raw power, efficient operation, and exceptional reliability, this motor ensures your FPV drones achieve superior flight performance and operational stability. It integrates our advanced motor technology, refined through years of developing electric mobility powertrains, into a compact and robust package.

Key Features

• Ultra-High Thrust Capacity: Designed for burst power, offering up to 4500g of max thrust.

• High-Performance Lineage: Benefits from advanced motor technology developed for electric mobility.

• Non-PRC Supply Chain: Built with a China-free supply chain for enhanced security and component integrity.

• Optimal Power Density: Delivers 1400W max power from a lightweight 103g design.

• NDAA Compliance: Designed to meet the requirements of the US National Defense Authorization Act (NDAA).

Technical Specifications

• KV Value: 900

• Max Thrust: 4500 g

• Voltage: 6S ~ 8S (3.7 V / cell)

�� Why Choose the Stone 3115 Motor?

With its compact 103g lightweight design, formidable 4500g max thrust, and Taiwanese manufacturing reliability, the Stone KV900 Motor is the trusted choice for professional drone operators and manufacturers. Our commitment to a China-free supply chain and NDAA compliance ensures this motor is suitable for the most sensitive and high-stakes operations. For security-conscious fleets, the combination of high-end performance engineering and verifiable supply chain integrity is unmatched.

Arcturus ESC 4 in 1 65A: Secure Power Meets Precision for Next-Generation UAVs

Mon, 13 Oct 2025 02:12:21 GMT

The Arcturus ESC 4 in 1 65A is a high-efficiency Electronic Speed Controller designed specifically for FPV and small-sized drones, delivering the perfect balance of robust power, advanced control, and unparalleled supply chain integrity. Built upon 15 years of specialized experience in high-reliability power electronics and compliant with NDAA requirements, this ESC ensures secure, stable, and high-performance flight across diverse critical applications.

Key Features

Arcturus ESC 4 in 1 65A architecture – compact (66x42x11mm), lightweight (30g) integration with powerful 65A continuous output.
Advanced Propulsion Control – utilizing Field-Oriented Control (FOC) and Space Vector Modulation (SVM) for superior efficiency and precision.
Sensorless Design Reliability – enhanced robustness by eliminating physical sensors prone to vibration and mechanical failure.
Industrial-Grade Thermal Management – double-sided cooling FETs and temperature protection for sustained demanding loads.
NDAA Compliant & Taiwan Origin – secure, "Red-Free" supply chain for defense and government contracts.

Technical Specifications

Current: 65A (rated) / 80A (peak) per motor
Voltage: 3S-6S Li-Po
Form Factor: PCBA (4-in-1)
Input: CAN/PWM

�� Why Choose the Arcturus ESC 4 in 1 65A?

With its robust 65A continuous current capacity, advanced FOC/SVM motor control, and critical "Made in Taiwan" NDAA compliance, the Arcturus ESC 4 in 1 65A is the trusted choice for drone manufacturers and integrators seeking high-reliability components for defense, government, and industrial UAVs. Whether you’re building long-endurance inspection drones or precision FPV systems, this ESC delivers consistent performance, operational safety, and crucial supply chain security.

Mercury AIO II: AI-Powered Precision for Critical Person Search and Identification

Tue, 30 Sep 2025 02:36:41 GMT

The Mercury AIO II is an advanced, all-in-one drone solution engineered for missions where the swift and accurate identification of individuals is paramount. At its heart lies a robust Qualcomm CPU, driving sophisticated AI capabilities that deliver superb person identification in real-time. This ready-to-fly UAV is purpose-built to provide an intelligent, unblinking eye for public safety, search and rescue, and other critical operations, offering unparalleled precision and autonomous intelligence to locate and monitor individuals in complex environments.

Key Features

Qualcomm-Powered AI for Superb Person Identification: Leveraging a robust Qualcomm CPU, the Mercury AIO II performs advanced, on-device AI inference for highly accurate and rapid person detection and identification, drastically improving efficiency in search and surveillance tasks.

Millimeter-Level Precision in Any Environment: Achieve reliable, pinpoint navigation even in GPS-denied zones like dense forests, urban structures, or disaster sites, ensuring comprehensive and precise coverage during person-centric missions.

Resilient, Real-Time Communication: Our proprietary tri-band video transmission system, with adaptive streaming and frequency hopping, guarantees a stable, low-latency, high-resolution video feed, maintaining continuous visual contact during crucial identification processes.

Rapid Deployment and Autonomous Capabilities: Designed for immediate operational readiness, the Mercury AIO II can be deployed swiftly, with embedded AI enabling autonomous scanning and flagging of individuals, allowing operators to focus on strategy rather than manual control.

Technical Specifications

CPU: Robust Qualcomm CPU (7nm Qualcomm QRB5165)
AI Capabilities: On-device AI for Person/Vehicle/Anomaly Detection from Qualcomm AI Hub
Navigation Precision: Millimeter-level, GPS-Denied Navigation (Visual Inertial Odometry - VIO)
Video Transmission: Proprietary Long-Range, Tri-Band Frequency Hopping, Adaptive Streaming
Max Flight Time: Up to 33 minutes
Max Speed: 55 mph
Dimensions: Compact and lightweight for agile deployment

�� Why Choose the Mercury AIO II?

For missions centered on finding and identifying individuals, the Mercury AIO II stands alone. Its powerful Qualcomm CPU and advanced AI are specifically optimized to excel in person identification, offering an unmatched advantage in speed and accuracy. This intelligent drone reduces the time and resources required for critical search operations, providing clear, actionable intelligence and ultimately enhancing the safety and success of missions where identifying people is the main objective.

✨ Gain the intelligent edge in person search and identification.

The Next Frontier of Flight: Precision and Intelligence on Board

Wed, 17 Sep 2025 13:26:26 GMT

The Mercury H743 AI Flight Controller is a breakthrough all-in-one solution for cutting-edge UAVs, engineered to push the boundaries of what's possible in flight. This system redefines performance by integrating a high-precision flight controller, resilient communication, and on-board AI, giving you a complete brain for your drone. With a powerful 7nm Qualcomm QRB5165 chipset at its core, the Mercury H743 AI FC delivers unparalleled stability, intelligent operation, and consistent performance for a wide range of professional applications.

Key Features

Mercury H743 AI Flight Controller architecture:
Compact design with integrated high-precision flight controller
Qualcomm QRB5165 chipset:
Fast processing and on-device AI capabilities
Proprietary stabilization and navigation:
Superior accuracy over open-source solutions
GPS-Denied Navigation:
Reliable millimeter-level navigation without GPS
Long-range video transmission:
Tri-band frequency hopping and adaptive streaming
Embedded AI:
On-device object recognition and real-time inference

Technical Specifications

Dimensions: 126mm × 82.5mm
Weight: 81g
Chipset: 7nm Qualcomm QRB5165 (Main Board)
Connectivity: Long-Range WIFI (802.11ax WIFI6), Tri-Band Frequency Hopping (2.4GHz/5.1 GHz/5.8GHz)
Precision: Millimeter-level (Position, GPS-Denied Navigation)
AI: Embedded AI with Qualcomm AI Hub models Peripherals: MIPI CSI D-PHY 6, CAN-FD 5V 2, PWM-CH8, PCIe M.2 E.key, 1G Ethernet RJ45

�� Why Choose the Mercury H743 AI Flight Controller?

With its remarkably compact 81g lightweight design, integrated 7nm SoC for high-precision flight control, and Made in Taiwan reliability, the FC M2 is the trusted choice for drone manufacturers and professional integrators alike. Whether you’re developing autonomous inspection drones, advanced surveillance UAVs, or custom robotics, this solution delivers consistent performance, unparalleled precision, and advanced intelligence.

✨ Elevate your autonomous capabilities today.
�� Learn more and request a quote

Unmatched Security and Performance for Tactical UAVs: Introducing the VIPER J1-10

Mon, 15 Sep 2025 01:16:11 GMT

The VIPER J1-10 is Sunrise Taiwan's multirotor UAV, meticulously designed for the most demanding tactical surveillance and reconnaissance missions.

Combining uncompromised security with robust performance, the VIPER J1-10 is built upon a foundation of 100% Made-in-Taiwan components and proprietary technology, ensuring reliability and compliance for critical operations.

Key Features

Secure Supply Chain:
Exclusively non-PRC components, fully NDAA compliant.
Proprietary Technology:
In-house flight control, video transmission, and communication systems.
Modular Architecture:
Rapid payload reconfiguration for diverse mission requirements.
Tactical Focus:
Engineered for military-grade stability and adaptability.
Long-Range Capability:
14 km tactical operation range.

Technical Specifications

Empty Aircraft Weight: Approx. 0.8kgw (excluding battery)
Effective Payload Mass: 2.4kgw
Flight Time: 15 minutes
Tactical Operation Range: 14 km
Cruising Speed: 60 km/h
Flight Altitude: 50 - 1000 meters
Frame: 10-inch Carbon Fiber / Aluminum Alloy
Power Battery: 10000mAh or above

�� Why Choose the VIPER J1-10?

With its unparalleled commitment to a secure, Made-in=Taiwan supply chain and robust tactical performance, the VIPER J1-10 stands as the trusted choice for defense and strategic applications worldwide. Its modularity offers unparalleled mission flexibility, while its Made-in-Taiwan pedigree guarantees integrity and operational stability.

Power Meets Precision for Next-Generation UAVs

Tue, 09 Sep 2025 00:19:08 GMT

The Perseus ESC 4in1 80A is a high-performance electronic speed controller designed specifically for quadcopter UAVs and FPV drones, delivering the perfect balance of raw power, intelligent control, and reliable safety . Built around an ARM 32-bit Cortex-M4 processor and enhanced with a noise-reducing circuit design, this ESC ensures smooth, stable, and interference-free flight performance across diverse applications.

Key Features

80A 8S 4-in-1 architecture

lightweight integration with strong current output

ARM Cortex-M4 controller

fast response and precise control

AM32 firmware support

open-source flexibility and easy upgrades

Multi-protocol compatibility

PWM / Dshot300 / Dshot600

Comprehensive protection

thermal shutdown, over-current safeguard, current sensing, and telemetry

Technical Specifications

Power Input: 3S–8S Li-Po (11.1V–33.6V)
Output Current: 80A continuous / 100A peak (10s)
Weight: 28g (typical)
Size: 56×56 mm (compact with heatsink)
Protocols: PWM, Dshot300, Dshot600
Firmware: AM32, upgradeable
Protection: Thermal & Over-current

�� Why Choose the Perseus ESC?

With its compact 28g lightweight design, robust 80A continuous current capacity, and Made in Taiwan reliability, the Perseus ESC is the trusted choice for drone manufacturers and professional pilots alike. Whether you’re building high-speed FPV racers or industrial-grade UAVs, this ESC delivers consistent performance and operational safety.

Introducing the 65A 4-in-1 ESC: Redefining High-Performance Drone Flight– Engineered in Taiwan.

Sat, 23 Aug 2025 16:49:16 GMT

Introducing the Sunrise Taiwan 4-in-1 ESC 65A 6S. This revolutionary product, designed specifically for quadcopters, is equipped with a high-performance processor and industry-leading technology. It aims to provide professional pilots and drone enthusiasts with unparalleled flight stability and precise control.

Why Is It Different?

● Powerful Core, Ultimate Performance:

It uses

an ARM 32-bit Cortex-M4 processor to ensure real-time and smooth signal processing. With a robust 65A continuous current and 80A burst current, it can handle the demands of high-intensity flight, keeping your drone in optimal condition during takeoff, acceleration, and sharp turns.

● Lightweight Design, Breaking Limits:

By perfectly integrating four separate ESCs into a single unit, the total weight is only about 22 grams. This extremely compact 4-in-1 ESC not only simplifies the drone's internal wiring but also provides a decisive advantage for weight-sensitive applications like racing and FPV drones, allowing for longer flight times and greater agility.

● Comprehensive Protection for Safe Flying:

It includes multiple built-in safety mechanisms such as overcurrent and thermal protection, effectively preventing equipment damage from overload or high temperatures. You can rely on its stability and durability for high-difficulty stunts or long-duration flights.

● Broad Compatibility, Easy to Use:

It supports 3S - 6S LiPo batteries and is compatible with various mainstream communication protocols like PWM, Dshot300, and Dshot600. This ensures your flight controller and ESC work together perfectly for a seamless flight experience.

�� Made in Taiwan – from design to manufacturing

The 4-in-1 ESC 65A 6S is already serving partners across industries and geographies.
�� Reach out to request a sample or discuss integration support.

Introducing the TY P640 Camera– Engineered in Taiwan.

Mon, 14 Jul 2025 04:43:48 GMT

Introducing the TY P640 – a compact, high-performance 640x512 thermal camera module designed for drone payloads, industrial inspection, automotive ADAS, and more.

Built for:

Drones / UAV payloads
Industrial inspection & process monitoring
Automotive ADAS & in-cabin sensing (OMS/CPD)
Defense, surveillance & night vision systems
Smart buildings & medical thermal sensing

Key Specs:

Resolution: 640 x 512
NETD: <35mK (F/1, 300K)
Weight: 40g (w/o lens)
Size: 30 x 30 x 33 mm
Output Interfaces: YUV / Parallel / MIPI-CSI / MIPI-DSP
Power: <2W , DC 3.3V / 5V
Frame Rate: 30FPS (60FPS optional)
Boot Time: <12ms

We offer a Made-in-Taiwan thermal solution , fully developed outside of the restricted red supply chain – offering global system integrators an alternative with flexibility, stability, and trust.

�� Made in Taiwan – from design to manufacturing

The Pioneer 640 is already serving partners across industries and geographies.
�� Reach out to request a sample or discuss integration support.

Taiwan is fast emerging as a key pillar in the global non-China UAV supply chain

Sun, 08 Jun 2025 15:46:42 GMT

Taiwan is fast emerging as a key pillar in the global non-China UAV supply chain — and Sunrise Taiwan stands at the forefront, bridging academic innovation with industrial execution to power next-generation drone solutions.

>> https://www.cio.com.tw/91915/

At Xponential 2025, Sunrise Taiwan captured significant attention from U.S. buyers for its non-China, one-stop UAV solutions.

Sun, 08 Jun 2025 15:29:48 GMT

At Xponential 2025, Sunrise Taiwan captured significant attention from U.S. buyers for its non-China, one-stop UAV solutions — reinforcing the growing demand for secure, autonomous drone technologies outside of Chinese supply chains. As a key components representative of Taiwan’s advanced manufacturing and AI-integrated UAV ecosystem, Sunrise Taiwan is emerging as a supply chain partner for U.S. defense and enterprise sectors, opening new avenues for bilateral cooperation in resilient, next-generation drone innovation.

>> https://www.facebook.com/share/p/18wGyNFWrt/?mibextid=wwXIfr

Sunrise Taiwan International Corp. and the Uncrewed Vehicle R&D Center, National Taiwan University, Forge Strategic Alliance to Deliver Secure, Scalable UAV Component Solutions

Tue, 27 May 2025 06:30:26 GMT

At the XPONENTIAL 2025 exhibition in Houston, Sunrise Taiwan International Corp. positioned its role as a strategic one-stop supplier of critical UAV components. The company presented a fully Taiwan-based, non-China supply chain tailored for global drone and autonomous system integrators — supported by flexible customization capabilities and growing international trust.

Xponential Houston 2025, Taiwan delegates and US representatives gathered in Taiwan Pavilion for the discovery of potential cooperations in the UAV industry worldwide.

Showcasing Taiwan’s Innovation Edge at XPONENTIAL

As a member of the Taiwan UAV Alliance, Sunrise Taiwan partnered with the Uncrewed Vehicle R&D Center at National Taiwan University (NTU UV Center) to showcase next-generation drone technologies that drew strong interest from European defense and commercial sectors. Highlights included:

Fiber Optic Gyroscope (FOG): Compact and modular, this high-precision solution is derived from military-grade patents and is 100% manufactured in Taiwan.
Common Optical Path System: A patented U.S. C4ISR platform supporting secure, multi-device signal integration and Li-Fi communication.
Two-Stroke UAV Micro Engine: A battlefield-proven , cost-effective propulsion solution that is already in service with European clients and proudly Taiwan-built.

The above photo showcased the series of critical components for drones presented by Sunrise Taiwan International Corp.The above photo showcased the series of critical components for drones presented by Sunrise Taiwan International Corp.

Flexible, Integrated, and Globally Aligned

Sunrise Taiwan delivers customizable, high-performance drone components — including flight controllers, servos, AI edge processors, GPS/IMUs, and companion computers — in configurations designed to meet commercial, industrial, and tactical UAV requirements.

We help global partners:

Accelerate integration
Simplify sourcing
Secure supply chains
Meet NDAA, ITAR, and other compliance mandates

Why Sunrise Taiwan:

One-stop UAV component sourcing
Non-China, Taiwan-based supply chain
Flexible integration and custom support
R&D collaboration with NTU UV Center
Growing trust from European defense and aerospace OEMs

�� Showcased at XPONENTIAL in Houston as a trusted partner for next-gen autonomous systems.

Introducing the ZST-F405-01 Flight Controller – Engineered in Taiwan.

Fri, 10 Jan 2025 10:15:39 GMT

Designed for professional drone developers, the ZST-F405-01 combines performance, flexibility, and trust. Featuring an STM32F405RGT6 MCU and rich peripheral support, it offers seamless integration for open-source flight stacks like Betaflight and Ardupilot.

Key Specs:

STM32F405RGT6 CPU
Supports 4~8S LiPo input
Built-in BEC: 5V/3A or 10V/3A outputs
16MB Flash Memory
5x UART, 1x PWM outputs
Receiver protocols supported: SBUS, PPM, DSM, CRSF, IBUS
Compatible with Betaflight / Ardupilot

�� Made in Taiwan – from design to manufacturing
��️ Non-PRC supply chain – built for teams that prioritize security and transparency

Whether you're building drones for industrial use, research, or mission-critical platforms, ZST-F405-01 is a dependable core for your UAV system.

taiwantunnel

ZST-MS9838 Why Your Drone Needs a Smarter Magnetic Sensor

Where Most Sensors Fall Short

What the ZST-MS9838 Does Differently

Magnetic Sensor Made in Taiwan

ZST-ESC65A-4in1-S2 : Designed, Manufactured, Sealed entirely in Taiwan

Component origin hindering your procurement effort?

65A Continuous With 8S Support: The Performance Specs

Compliance and origin shouldn’t be the bottleneck

Mercury H743 Flight Controller — Technical Deep Dive & Compliance Overview

Mercury H743 Flight Controller —

Technical Deep Dive & Compliance Overview

[Compaison] I. Technical Specifications Comparison

II. Global Compliance & Transparency Commitment

III. Expansion & Interfaces

Venus 640 Thermal Camera Module is designed for UAVs and mission-critical platforms.

Venus Dual EO/IR Camera (ZST-CFP DUAL-CAM02)

A lightweight, long-range dual-sensor imaging module engineered for ISR-grade performance.

The Venus Dual EO/IR integrates a 20MP EO sensor, LWIR thermal camera, and long-range optical zoom into a compact 26g payload—ideal for small UAVs, unmanned ground vehicles, and robotic platforms.

Key Features

Applications

Polaris F405-55A Stack：A Secure, NDAA-Compliant Flight Control & Power System for Professional UAV Platforms

Overview

Key Features

Applications

Commitment to Secure Supply Chains

VORTEX I : The Integrated Propulsion System for Next-Gen Industrial UAVs

Stone 107010 Motor 900KV: Unmatched Power and Precision for large-sized agriculture and cargo drones

Technical Specifications

Stone 3115 Motor: Unmatched Power and Precision for FPV drones

Arcturus ESC 4 in 1 65A: Secure Power Meets Precision for Next-Generation UAVs

Mercury AIO II: AI-Powered Precision for Critical Person Search and Identification

Key Features

Technical Specifications

�� Why Choose the Mercury AIO II?

The Next Frontier of Flight: Precision and Intelligence on Board

Unmatched Security and Performance for Tactical UAVs: Introducing the VIPER J1-10

Power Meets Precision for Next-Generation UAVs

Key Features

Technical Specifications

Introducing the 65A 4-in-1 ESC: Redefining High-Performance Drone Flight– Engineered in Taiwan.

Introducing the TY P640 Camera– Engineered in Taiwan.

Taiwan is fast emerging as a key pillar in the global non-China UAV supply chain

At Xponential 2025, Sunrise Taiwan captured significant attention from U.S. buyers for its non-China, one-stop UAV solutions.

Sunrise Taiwan International Corp. and the Uncrewed Vehicle R&D Center, National Taiwan University, Forge Strategic Alliance to Deliver Secure, Scalable UAV Component Solutions

Introducing the ZST-F405-01 Flight Controller – Engineered in Taiwan.

[Compaison]

I. Technical Specifications Comparison